Principles of mechanism

Přední strana obálky
1841
0 Recenze
 

Co říkají ostatní - Napsat recenzi

Na obvyklých místech jsme nenalezli žádné recenze.

Obsah

Další vydání - Zobrazit všechny

Běžně se vyskytující výrazy a sousloví

Oblíbené pasáže

Strana xiii - instead of considering a machine to be an instrument by means of which we may change the direction and velocity of a given motion, I have treated it as an instrument by means of which we may produce any relations of motion between two pieces.
Strana 43 - construction of a toothed wheel has been partly imitated in modern mill-work, for it is found that if in a pair of wheels the teeth of one be of cast-iron, and in the other of wood, that the pair work together with much less vibration and consequent noise, and that the teeth
Strana 134 - inch, so that as all the other forms lie between these, it is clear that if we select only four or five examples for the outer side of the tooth and ten or twelve for the inner side, that we can never incur an error of more than the
Strana iv - every machine will be found to consist of a train of pieces connected together in various ways, so that if one be made to move they all receive a motion, the relation of which to that of the first is governed by the nature of the
Strana 300 - mechanism ; but the reciprocation is produced so simply that it is often worth while to retain the crank, and correct the law of velocity by combining other pieces with it in a train. By trains of link-work very complex laws of motion may be derived from a uniformly revolving driver. This will be best illustrated by the
Strana 133 - is also true for an annular wheel of the same radius and number of teeth, n becoming the root and p the point of the teeth. For a rack, the pitch line DE becomes a right line, and DA, EA, perpendiculars to it, at a distance equal to the pitch.
Strana 133 - an arc of the given pitch circle, and upon it set off DE, equal to the pitch, and bisected in m. Draw radial lines DA, EA. For the arc within the pitch circle apply the slant edge of the instrument to the radial line AD, placing its extremity D on the pitch circle, as in the figure. In the Table headed,
Strana i - MECHANISM, DESIGNED FOR THE USE OF STUDENTS IN THE UNIVERSITIES, AND FOR ENGINEERING STUDENTS GENERALLY.
Strana 133 - Numbers for pitches not inserted in the tables may be obtained by direct proportion from the column of some other pitch: thus for 4-inch pitch, by doubling those of 2-inch, and for half-inch pitch by halving those of
Strana 252 - be the driver, and let it revolve in the direction from T to t. Then since the radius of contact sP increases by this motion, and the corresponding radius PH decreases, the edge of the driver will press against that of the follower, and so communicate a motion to it

Bibliografické údaje