Obrázky stránek
PDF
ePub

244 U.S.

Opinion of the Court.

opinion that the claims of the patents relied upon were void for want of patentable novelty. This decree is now here for review on certiorari.

A railroad tie-plate, sometimes called a "wear plate," is a rectangular piece of metal, originally with both surfaces flat, designed to be placed upon the tie immediately under the rail, for the purpose of protecting the tie from the wear, which in soft wood is very great, incident to the vibration of the rail caused by passing engines and trains and for the purpose of holding the rail more firmly in place than it could otherwise be held by the spikes without the plate, thereby preserving the gauge of the track.

In the early days of railroading when engines and cars were small and light, when speed was comparatively slow and when hardwood, which held the spikes firmly in place, was abundant and cheap, such plates were little used; but the increase in weight of rails and rolling stock, the higher speed of trains and the necessary use of the cheaper soft woods for ties have brought them into extensive use. The general use of these plates with heavy rolling stock and traffic presented the problem of making them as strong and inexpensive as possible and in a form such that they would adhere firmly to the ties while doing the least possible damage to the fibre of the wood.

The statement of this problem shows convincingly that even at the beginning it offered a very limited field for invention, if, indeed, it presented any field at all for the exercise of that inventive genius which it is the policy of the law to protect and reward with a monopoly for seventeen years.

The claims of the patents declared on are as follows: Claim 8 of Patent No. 538,809 reads:

"A railway-tie plate formed on the under side with devices more or less sharpened adapted to penetrate and engage the tie, and on its upper side with a series of flanges on which the rail rests, substantially as described."

[blocks in formation]

It would be difficult to write in more general terms a description of any plate, whether channeled, corrugated, grooved or ribbed on both sides.

Claims Nos. 1 and 2 of Patent No. 691,332, differ so slightly that No. 1 will suffice:

"A railway-tie plate provided on its upper side with one or more flanges on which the rail may rest or by which it is directly sustained and on the under side with one or more tie-engaging flanges extending parallel with the upper flanges and directly beneath the latter, substantially as described."

Claims 7 and 9 of Patent No. 721,644 are so similar that only No. 7 need. be quoted:

"A tie-plate provided in its rail-supporting surface with transverse grooves or channels, and at one margin of said supporting surface with a transverse rail-abutting shoulder."

Wolhaupter the grantee of the three patents was a civil engineer employed by a railroad company and he testifies that he first turned his attention to tie-plates for the purpose of improving them "in the year 1893 or early in 1894" and the earliest of his three patents in suit is dated May 7, 1895.

The earliest patent for a "wear" or tie-plate by that specific name, which is shown by this record, was issued in 1881 and between that date and the date of the issuing of the first patent in suit to Wolhaupter in 1895 twentysix patents were issued, and in the seven years between 1895 and 1902, when Wolhaupter's second patent in suit was issued, nineteen more patents were issued for various forms of this simple device.

Thus it is seen that Wolhaupter came late into this narrow, and even then much exhausted, field of investigation and in his first patent (not here in suit), dated December 11, 1894, he claims invention for placing one, or permissibly two, "elongated divided ridges" on the under

244 U. S.

Opinion of the Court.

side of such a plate to engage the tie and on the upper side a series of ridges parallel with those on the lower side, but adapted after being rolled to being cut away to form a seat for the rail. There is no claim as to the relative positions of the ridges on the two faces of the plate.

In his second patent (the first in suit), his claim of invention is for "one or more" flanges "more or less sharpened" (not divided now) on the under side of the plate to engage the tie, and on the upper side a series of flanges (ridges) on which the rail may rest. The flanges (ridges) on the upper surface must not be placed vertically above the flanges or ridges on the lower and there is no provision for cutting them away for a rail seat as in the first patent. The dominating thought of this patent is the cutting of the plate "on a diagonal line with respect to the rail flange," but as this form of plate is not claimed by the patentee in his later patents, and as no merit is claimed for it in the testimony in the record, it will be neglected.

In his third patent Wolhaupter's inventive genius placed the flanges on the under side parallel with and directly beneath those on the upper side of the plate, instead of between them as in the second patent, or regardless of either position as in the first.

In his fourth patent the flanges on the lower side are given a position "transverse" to the ridges on the upper side.

In the first three of petitioner's patents the flanges on both surfaces of the plate are for use parallel to the grain of the tie and transverse to the length of the rail. In the fourth patent the flanges on the under side are described in the specifications and drawings as transverse to, but in claim four as parallel to, the grain of the tie.

The minute and obviously wholly tentative variations, thus described, in the plates in the Wolhaupter patents, are fairly illustrative of the slight differences in form given to this simple device on which this record shows forty

Opinion of the Court.

244 U. S.

five separate patents were granted during the twentytwo years between 1881 and 1903.

This discussion of the record and reference to the respondent's patents brings us to the question, Do the claims of these patents describe an "invention or discovery" "a new and useful . . manufacture improvement thereof," such as our patent laws were designed to protect?

or

or

We have seen that long before Wolhaupter's patents tie-plates were used for the purposes for which his plates were designed. It was certainly obvious that if wedge shaped flanges, or ribs or claws, or other downward projections, were placed on the under side of such plates they would penetrate the ties when weight was put upon them and thus assist in holding the rail in place.

Very certainly it was also general knowledge before 1895 that if one wished to reduce the weight of a plate without loss of strength this could be done by using channel iron, angle iron or corrugated iron, or, which comes to the same thing, by having the plate made with flanges or ribs (Servis Railroad Tie Plate Co. v. Hamilton Steel & Iron Co., 8 Can. Exch. Rep. 381), and the placing of flanges on the upper side of such plates to engage the outer flange of the bottom of the rail, and thus to receive the lateral thrust caused by the flanges of the wheels tending to spread the rails, was also obvious and well known before Wolhaupter's patents.

To the obviousness of the elements necessary to the solution of this problem must be added the state of the art, if such it may be called, when Wolhaupter, late in 1893 or early in 1894, began, as he says, the investigation of tie-plates and "familiarized himself with the literature of the subject." He testifies that he had seen the tieplates of Servis (patented 1881, No. 249,407; 1884, No. 294,816) and of Goldie (patented 1887, No. 356,760; 1890, No. 426,530; 1891, No. 457,584; 1891, No. 457,585, and

[blocks in formation]

1892, No. 485,030) and he is presumed by the law to have had all prior patents before him when he applied for his patent. Duer v. Corbin Cabinet Lock Co., 149 U. S. 216, 223; Mast, Foos & Co. v. Stover Mfg. Co., 177 U. S. 485, 493.

In the plates of Servis, Wolhaupter saw a plate with "a flange or flanges formed on the lower side" to engage the tie lengthwise of the grain of the wood and, of course, transverse to the rail, and in the Goldie patents he saw in No. 457,584 "a triangular tooth like projection" extending downward from the bottom of the plate and a raised shoulder on the upper side to receive the lateral thrust of the edge of the rail flange, and in patent No. 485,030 he saw a plate with two downward projecting ribs to engage the tie, with a shoulder on the upper side to receive the thrust of the rail, and with a "transverse depression" in the upper surface, and bearings or flanges on each side of this depression to receive and support the base of the rail.

We thus have Wolhaupter confessing that before he applied for a patent he had knowledge of tie-plates with "ridges," "flanges" and "teeth" projecting downward from the under side of them to engage the tie, differing at most only in form, and in this but slightly, from the similar downward projecting flanges "more or less sharpened" which appear in all three of his patents in suit; that he had knowledge of plates with a shoulder on the upper surface to receive the thrust of the side of the bottom of the rail, not differing from the "rail abutting shoulder" shown in all three of his patents, and that he also had knowledge of the latest Goldie patented plate, with the upper surface "channeled" by having a depression extending across the plate under the central portion of the bottom of the rail and with a bearing on each side of it to support the rail.

It is thus made very clear that the only appearance

« PředchozíPokračovat »